Views: 0 Author: Site Editor Publish Time: 2022-11-03 Origin: Site
FIRE EXIT BAR is a new type of fire alarm escape door lock that combines security and fire protection functions. It can realize anti-theft, voice prompt, alarm, and other functions. It is mainly used in public places with high traffic (hotels, theaters, schools, etc.). Bars, factories, office buildings, supermarkets, etc.) on the escape door. Next, let's take a look at the installation method and installation steps of the FIRE EXIT BAR.
Here is the content list:
How to install FIRE EXIT BAR
Installation steps for FIRE EXIT BAR
The most commonly used FIRE EXIT BAR is the external FIRE EXIT BAR, and they are installed in the following ways:
The most common standard usage is to mount to the hinge side, door open side. When so installed, the arms of the FIRE EXIT BAR protrude outward at approximately 90° to the door frame. In the second usage, it is installed on the side opposite the side of the ammonium chain, with the door closed. Usually, an extra bracket supplied with the FIRE EXIT BAR is mounted to the arms parallel to the door frame. This usage is usually in reluctance to install the FIRE EXIT BAR on an exterior door that opens outside of a building.
The FIRE EXIT BAR body is, in turn, mounted to the door frame instead of the door, and the FIRE EXIT BAR is on the opposite side of the door. This usage can also be used on exterior doors that open outwards, especially those with a narrow upper edge and not enough room to accommodate the FIRE EXIT BAR body.
The third usage, the vertical FIRE EXIT BAR (built-in vertical FIRE EXIT BAR) is upright and invisible on the inside of one side of the hinge of the door leaf, and the screws and components cannot be seen from the outside. It can be integrated with the door and can be opened and closed in one direction construction is simple.
Usually, the instruction manual provided with the FIRE EXIT BAR has an installation template, so read the instruction first, according to the opening direction, the size of the closing force, and the FIRE EXIT BAR body,
connector with
The installation size between the door and the chain to determine the installation position.
2) According to the requirements of the closing force, the closing force can be changed by inverting the connecting seat by 180° or changing the connection position between the connecting rod and the connecting seat.
Adjust the connection
The greater the distance between the rod and the center line of the door dumpling chain, the smaller the closing force of the FIRE EXIT BAR, and vice versa.
3)) Determine the position of the mounting screws according to the position instructions on the installation template, and then drill and tap.
4) Install the FIRE EXIT BAR body with screws.
5) Install the fixed connector.
6) Install the driver board with screws.
7) Adjust the adjusting rod to 90° with the door frame, and then connect the connecting rod and the drive plate.
The above is about the installation method and installation steps of the FIRE EXIT BAR. If you are interested in PANIC EXIT DEVICE, you can contact us. Our website is www.cndoorcare.com.
