Publish Time: 2022-07-08 Origin: Site
PANIC EXIT DEVICE is mainly used for emergency exit doors in supermarkets, shopping malls, office buildings, hospitals, schools, factories, and other public places with high traffic flow. For safe escape in emergencies such as fire, PANIC EXIT DEVICE can usually be divided into two types: one is ordinary type, and the other is alarm type. When the escape lock with alarm is used without permission, it will emit a high-decibel alarm sound, and it can be disarmed by a key, credit card, password, etc. to make it stop and restore the alarm function. Supermarkets, schools, hospitals, and other places have extremely high requirements for fire exit safety. New fire safety laws and regulations require that public places must be equipped with fire exit locks.
The following is a list of contents:
l The main role of PANIC EXIT DEVICE
l How to install PANIC EXIT DEVICE？
1. Protect life safety: In case of fire and various emergencies, PANIC EXIT DEVICE ensures that a large number of people in the building can escape quickly and safely. For spaces with more than 100 people, PANIC EXIT DEVICE should be installed on the emergency exit door.
2. Security function: On the premise of ensuring the safety of people in the building, lock the outer door safely. PANIC EXIT DEVICE has both anti-theft functions and rapid evacuation in emergencies. All functions of PANIC EXIT DEVICE, when you go out indoors, you only need to press the push bar to retract all the latches to open the door. PANIC EXIT DEVICE shall be used on fire doors and shall not be equipped with tongue retract locking.
3. Automatic locking function after each door is closed: It not only effectively prevents the unqualified personnel from entering the building from the escape passage, but also ensures that the people in the building can easily escape. PANIC EXIT DEVICE improves and guarantees the safety and security of the building escape function.
1. The PANIC EXIT DEVICE nut (stainless steel) fixes the left door lock block, door lock block gasket II and door lock block gasket I on the door lock block installation base according to the position.
2. Install the PANIC EXIT DEVICE door lock block bushing and the door lock block switch drive shaft in the lock hole of the left door lock block.
3. Install the double-circuit travel switch on the door lock block switch mounting plate with cross recessed pan head screws to form the emergency left door lock switch assembly.
4. Install the PANIC EXIT DEVICE left door lock switch assembly on the component with combined screws. When installing, pay attention to adjust the installation position of the left door lock switch assembly, so that the contact of the switch is in a natural state and is tangent to the drive shaft of the door lock block switch. When the door lock block switch drive shaft rises 5mm, the switch acts reliably, and the switch is in the opposite state.
5. Install the door lock block baffle and door lock block gasket on the components with screws, flat washers, and nuts, and install the door lock block limit rubber plate on the door lock block baffle with screws and nuts.
6. Install the double-circuit travel switch on the door lock block switch mounting plate with cross recessed pan head screws to form the left door lock block switch assembly, and fix the PANIC EXIT DEVICE left door lock block switch assembly on the emergency door lock block with combination screws on the baffle.
The above is about the main functions and installation methods of PANIC EXIT DEVICE. If you are interested in PANIC EXIT DEVICE, EXIT DEVICE, or PANIC PUSH BAR, you can contact us. Our website is www.cndoorcare.com. I look forward to your arrival very much and hope to cooperate with you.